NOVA VOYAGER 18" DVR DRILL PRESS

COMPLETE WITH:

• 5/8” drill chuck & key.
• Firmware USB cable.
• Knock-out wedge.
• Adjustment wrench.
• Hex keys.
  FEATURES:
• Powerful direct drive 1.75 HP high torque motor with no pulleys or belts to cause vibration.
• Digital Variable Reluctance (DVR) Direct Drive Technology with Adaptive Control™ Software which works for you to produce optimum results in wood, metal, plastic and glass.
• Constant torque under load, depth and vibration sensors and emergency stop.
• Slow start pilot hole, tapping assist with chip breaking cycle and self start functions.
• Intelligent speed selection and dial knob for precise speed adjustments.
• Electronic braking and forward/reverse.
• Stroke: 6”.
• Optional setting can add additional variable speed range 3,000 to 5,500 RPM.

The DVR Motor drive is a unique type of motor and controller where the motor and controller interact. The motor provides data to the controller on its position and load conditions. The controller uses this data to handle all the timing and power management to ensure an energy efficient and powerful motor.

The DVR integrated motor drive system contains four main parts, the DVR Motor, the Rotor Position Sensor (RPS), the drive control board and the human-machine interface (HMI). The control board, RPS and HMI make up the electronic control system of the drive. The control board receives the commands from the user through the keypad and the HMI board, and it provides useful feedback information to the user such as the running speed and load on the motor. The information is displayed to the user via the LCD display.

NOVA VOYAGER 18IN DVR DRILL PRESS 120 VOLT 1 PHASE