MITUTOYO HR-530 ROCKWELL HARDNESS TESTER

The HR530 includes a color touch-screen controller. Four display types are available, as well as enhanced statistical graphing. ASTM D785 Part A and B now can be performed. Common Light Force Brinell testing forces from 6.25 to 187.5kgf. All scales are shown on a single screen for ease of use.

FEATURES:

• Inside Ring Hardness Testing: Test hardness of an inside ring wall without cutting the ring. Minimum diameter is 34 mm, but inside diameters as small as 22 mm can be tested using the optional 5 mm diamond indenter.
• Display with Color Touch-Screen: A color touch screen displays results of statistical calculations and graphic functions, which can be stored as text data. The touch-panel display can be mounted on top of the tester to save space.
• Direct Hardness Scale Selection: The required hardness scale can be selected with the touch panel. The initial test force and loading force are automatically set in accordance with the selected scale.
• Curved Surface Compensation and Measurement: The curved-surface function enables curved surfaces, including round bars and spheres to be tested for hardness as easily as flat surfaces.
• Statistical Analysis: The touch screen provides statistical calculation of the maximum value, minimum value, mean value and standard deviation when analyzing multi-point test results.
• Graphic Display of Statistical Calculation Results and X-R Control Charts: Numeric display of statistical analysis results, including maximum and minimum values mean value and graphic display of X-R control charts and histograms required for hardness evaluation.
• Measurement with a Nose-indenter Shaft: Nose-type indenter enables measurement on a flat top surface of a specimen and the inside surface of a cylindrical specimen.
• Continuous Measurement Function: When testing multiple workpieces with the same height continuous testing is possible by pressing the foot switch or the start button.

MITUTOYO HR-530 ROCKWELL HARDNESS TESTER