KURT D-810 ANGLOCK VISE

The original Kurt AngLock® D-Series vises are designed for precision part clamping on basic machine tools such as knee-type mills, and machining centers. D-Series vises are ideal for use in running production parts where datum, flatness, and parallelism is important. You can precision bore, tap, drill, grind, and finish with high accuracy on most parts made of die cast aluminum, steel, and iron in your Kurt AngLock® vises. No other brand can give you the time proven accuracy of the Kurt AngLock® vises.

All Kurt vises have a friction reducing, needle bearing, thrust collar. The needle bearing increases jaw clamping pressure.

Kurt’s D-810 FEATURES AN UPDATED BODY STYLE:

• Quick Set-up.
• Top down, four bolt design on the stationary jaw reducing vise deflection by 25% while allowing total disassembly of the vise without removing the body from the machine table. Special brush seals shield and protect vise screw threads from machined chips and residue.
• The nut has been shortened so as not to protrude past the end of the vise body. Powder coat paint finish resists coolant-induced peeling for greater corrosion protection. The overall vise footprint is identical to earlier models so both can be used interchangeably and in tandem.
• With a jaw opening of 10" and clamping force up to 11,600 lbs., the D-810 vise locks parts precisely including very large parts for aggressive "hogging out" operations.

FEATURES:

• AngLock® design assures the movable jaw does not lift.
• Standard bed height of ± .001".
• Matching bed heights within ± .001" at additional cost.
• Hardened vise bed.
• Hardened jaw plates.
• Semi-hard steel screw.
• 80,000-PSI ductile iron body.
• Matching of the keyway to the stationary jaw ± .001" is available for at additional cost.

KURT D-810 ANGLOCK VISE