KOOLMIST 80SM KOOL LITE NO TANK

These models are to be used with your own tank or sump. Lite Duty models are best used in production operations that require minimal set up changes. They generate a very fine spray mist.

FEATURES:

• Simplest of the systems: The controls of these units are mounted permanently to the machine, close to the operator and the cut.
• No Coolant Tank Furnished: Coolant mix may be placed in the machine sump, or in any clean container that will not contaminate the coolant. If the sump is used the conventional flood coolant pump must be made inoperative.
• Coaxial Coolant Line: Coolant and compressed air are not mixed until they reach the nozzle. To overcome the need for dual lines, Kool Mist has developed a coaxial line, or a hose within a hose.
• 2’ nylon braided coolant line.
• Easy to Use Control: Output from each nozzle is regulated by a single knob on the control. Mist Spray may be turned on or off instantly to coordinate with the cutting cycle, and the spray mix made lean or rich as needed. Nozzle position can be a permanent mount or the flexible magnetic base. 4" brass straight nozzle is standard.

KOOLMIST 80SM KOOL LITE NO TANK