.
|
Page |
Description |
Found By |
Date |
USA / Canada |
1 |
Quick index error - Countersinks are listed on pg. 68-74 |
Charlie Y - KBC Team |
10/04/2006 |
USA/CANADA |
5 |
Heading Error - Huot Drill Boxes should read Huot
Drill Indexes. |
Susan - Admiral Mill |
10/06/2006 |
USA/CANADA |
14 |
Text Error - Above set chart says Sets in Metal
Index Case. Should read "Sets in Plastic Case" as stated below
the chart. (#1-826-14352) |
Kathy K - KBC Team |
10/17/2006 |
USA/CANADA |
43 |
Description Error - The 5/8" Carbide Tipped SDS PLUS Hammer Drill is a 8" OAL and has a 6" useable length. #1-010-086 |
Kathy K - KBC Team |
2/20/2008 |
USA/CANADA |
44 |
5 Pc. Combined Drill & coutner sink Sets - heading in chart says Reg. Net Price. It should be Our Net Price. |
Sabina K - KBC Team |
6/28/2007 |
USA/CANADA |
52 |
Irwin SPEEDBOR 8 pc. Set comes with a 1-1/8" bit not a 1-1/4" as listed. (#1-820-341008) |
Kathy K - KBC Team |
6/22/2007 |
USA/CANADA |
53 |
Missing Text - Heavy Duty Electromagnetic Drill Stand - Add Weight of 48 lbs. to features. (#1-827-010) |
Kathy K - KBC Team |
11/28/2006 |
USA/CANADA |
55 |
Starrett Mechanics' Quickshot Arbored Hole Saw Kit states that it includes 3/4" but it should be 7/8" thru 1-1/2". (#1-856-65606) |
Doug - Shenandoah County Dept. of Solid Waste, VA |
3/28/2007 |
USA/CANADA |
61 |
Wrong Description - Shows 1/4" wrong shank dia. - should be 5/16" on all the .230 min. bore. (#1-428-BB2301000 to #1-428-BB230900). |
Mike - KBC Team |
2/20/2008 |
USA/CANADA |
61 |
Text Error - #1-428-BB1801500 the maximum bore dimension is incorrect, it says .1500, but should be 1.500. |
Kathy K - KBC Team |
3/27/2008 |
USA/CANADA |
61 |
Text Error - #1-428-BB1801250 the maximum bore dimension is incorrect, it says .1250, but should be 1.250. |
Greg S - KBC Team |
3/27/2008 |
USA/CANADA |
61 |
Text Error - #1-428-BB1801100 the maximum bore dimension is incorrect, it says .1100, but should be 1.100. |
Kath K - KBC Team |
3/27/2008 |
USA/CANADA |
61 |
Text Error - #1-428-BB1601000 & #1-428-BB1801000 the maximum bore dimension is incorrect, it says .1000, but should be 1.000. |
Steve - Ad Machine |
3/27/2008 |
USA/CANADA |
64 |
Description change - #1-166-400 & #5-614-107 are not supplied in
a metal index as stated. They are supplied in a wood stand. |
Kathy K - KBC Team |
8/20/2007 |
USA/CANADA |
69 |
Wrong text - (#1-155-612, -812, -912) have the
incorrect shank size listed as 3/8. the correct size is 1/2" shank. |
Sharon S - KBC Team |
7/30/2007 |
USA/CANADA |
74 |
Wrong Dimensions: Rico Outside Chamfering Mills. (#1-162-903 Recess Hole is 3/16", Body Length 1-5/16"), (#1-162-904 Body Diameter 1-3/8", Body Length 1-3/4"), (#1-162-906 Recess Hole 5/8", Body Diameter 2-1/2", Body Length 2-1/2"), & (#1-162-907 Recess Holde 3/4", Body Length 2-7/8"). |
Lynne - KBC Team |
6/28/2007 |
USA/CANADA |
92 |
Description Error - Metric Tap & Die Sets are actually 45 pcs. not 44 pc. as described. (#5-314-9547 & #5-314-9647) |
Greg S - KBC Team |
2/20/2008 |
USA/CANADA |
93 |
Catalog should state #1-842-RTC1412C Kit also includes the M10 x 1.5
size |
Bob H - KBC Team |
9/08/2006 |
USA/CANADA |
94 |
Text Error - (#1-360A-1166, -1246, & -1326)
Ground Thread Limits should be H4 not H6 as shown. |
Greg S - KBC Team |
10/11/2007 |
USA/CANADA |
96 |
Text Error - (#1-360A-1167, -1247, & -1327)
Ground Thread Limits should be H4 not H6 as shown. |
Greg S - KBC Team |
10/11/2007 |
USA/CANADA |
98 |
Text Error - (#1-360A-1168, -1248, & -1328)
Ground Thread Limits should be H4 not H6 as shown. |
Greg S - KBC Team |
10/11/2007 |
USA/CANADA |
100 |
Text Error - (#1-360A-1166K, -1246K, & -1326K)
Ground Thread Limits should be H4 not H6 as shown. |
Greg S - KBC Team |
10/11/2007 |
USA/CANADA |
102 |
Text Error - Metric Hand Taps have the wrong Ground Thread Limits listed. (#1-373-002 thru #1-373-156, #1-373-002T thru #1-373-132T, #1-373-002B thru 1-373-132B, #1-373-002K thru #1-373-132K) |
Greg S - KBC Team |
3/27/2008 |
USA/CANADA |
109 |
Text Error - Metric Spiral Pointed Hand Taps show
incorrect No. of Flutes. (#1-317-002 thru -048) should say 2 Flutes.
(#1-317-050 thru -132) should say 3 Flutes. |
Mike - KBC Team |
9/12/2006 |
USA/CANADA |
109 |
Text Error - Metric Spiral Point Hand Taps have the wrong Ground Thread Limits listed. (#1-317-002 thru #1-317-132) |
Greg S - KBC Team |
3/27/2008 |
USA/CANADA |
121 |
R&N Spiral Pointed STI Taps all part # prefixes
should be 131-
R&N Metric Spiral Pointed STI Taps all
Part # prefixes should be 131M-. |
Lee T. - KBC Team |
9/27/2006 |
USA/CANADA |
129 |
Catalog should state #1-842-RTC1412C Kit also includes
the M10 x 1.5 size |
Bob H - KBC Team |
9/08/2006 |
USA/CANADA |
136 |
Tapmatic Rx 30 Tapping Heads collet info is incorrect.
Should say: 21600 (#0-8) & 21700 (#10 - 1/4). (Part # 1-415-013033,
-013006, -013037, -013050 |
Greg S - KBC Team |
10/02/2006 |
USA/CANADA |
136 |
Tapmatic Rx 70 Tapping Heads collet info is incorrect.
Should say: 24100 (#10-1/2) & 24500 (1/2"-3/4") - Part
#1-415-017003 |
Greg S - KBC Team |
10/02/2006 |
USA/CANADA |
136 |
Tapmatic Rx50 Tapping Heads collet info is incorrect.
Should say: 22100 (0-1/4), & 22200 (1/4-1/2) - (Part #1-415-0153033,
-015006, -015050) |
Greg S - KBC Team |
10/02/2006 |
USA/CANADA |
137 |
Tapmatic Rubber Flex collets text error. Header
is missing size of NSM2. Should read: "For 30X, 20X, SPD3, R3, & NSM2" Header
is missing size of NSM4. Should read: "For 50X, 40X, SPD5, R5, & NSM4." Header
is missing size NSM6. Should read "For 70X, 60X, SPD7, R7, & NSM6." Header
is missing size of NSM8. Should read: "For 90X, 80X, SPD 9A, & NSM8." |
Lynne - KBC Team |
9/07/2006 |
USA/CANADA |
137 |
Missing Text - Tapmatic NCRT Series Tapping Heads
collets header should say: Rubber Flex Collets (Part # 1-415-42251CRF,
-422525CRF, -42501CRF, & -425025CRF) |
Greg
S - KBC Team |
10/02/2006 |
USA/CANADA |
137 |
Missing Collets - Tapmatic NSM2 should have a second
collet listed in the chart. Should say: 21600 (#0-8), & 21700 (#10-1/4) |
Greg
S - KBC Team |
10/02/2006 |
USA/CANADA |
139 |
Size Change - Tapmatic Sttel & Rubber Flex
Collets - (#1-415-22000 is changed from .194-.318 to .176-.320), (#1-415-20100
is changed from .045 to .043-.049), (#1-415-20200 is changed from .082
to .063-.071), & (#1-415-20300 is changed from .141 to .130-.142) |
Lynne
G -
KBC Team |
10/31/2006 |
USA/CANADA |
141 |
Text Error - KBC Ground Thread Chasers are 33 Degree
Chamfer not 32 Degree. |
Kathy
K -
KBC Team |
11/07/2006 |
USA/CANADA |
146 |
Text Error - The shank is listed as 1-1/4", it should be 1" - #5-400C-22448 |
Eagle Machine Tool - Winnipeg MB |
2/20/2008 |
USA/CANADA |
150 |
Text Error - Metric Two-Flute Single End Mills #5-310-158 should say it has a 10mm shank - a 8mm. |
Todd - Tool Time |
3/16/2007 |
USA/CANADA |
151 |
3 Flute M-42 Cobalt Single End Mills for 5/32" should be 1/4" flute length not 1/2" (#1-332-300). |
Monica - KBC Team |
7/26/2007 |
USA/CANADA |
152 |
Text Error - Multiple Flute Center Cutting Single End Mills chart has No. of Flutes and OAL switched on the right side of the chart. (#5-304-110 thru -120, #5-304-151 thru -165, #5-304-185 thru -235, 5-304-237 thru -290) |
Jonathan Lafrance - Quebec Industriel |
11/29/2006 |
USA/CANADA |
152 |
Text Error - Multiple Flute Single End Mill (#5-305-235) should have an OAL of 4-1/4" not 4-1/2" as shown. |
Mike - KBC Team |
6/06/2007 |
USA/CANADA |
155 |
Text Error - Multiple Flute Long Length Center Cutting Single End Mills chart has No. of Flutes and OAL switched on the right side of the chart (#5-307A-42223 thru -42647, #5-307C-42220 thru -42640) |
Bob H - KBC Team |
1/11/2007 |
USA/CANADA |
162 |
Wrong description in chart on the CAT 40, 1". Says 1" x 3" -
should be 1" x 4" end mill holder. # 7-520-TPC40 Set |
CJ - KBC Team |
9/26/2006 |
USA/CANADA |
172 |
Description Error - Incorrect length of cut for #1-332- (-120 should
be 5/8),
(-121 should be 3/4), (-122 should be 3/4), (-123 should be 1-1/4),
(-124 should be 1-5/8),
(-125 should be 1-5/8). |
Kathy
K - KBC Team |
9/11/2007 |
USA/CANADA |
182 |
Part # Error - Right column should not begin with 1-867-38956 (it is a duplicate from the previous column) - Needs to be removed and all remaining part #s are misaligned with descriptions & need to move up one line to their correct descripton. The last part # should be 1-867-38946, which is missing. |
Bob H - KBC Team |
11/16/2006 |
USA/CANADA |
185 |
Text Error - The catalog shows the wrong column headings. The Shank Size is Flute Diameter, Flute Diameter is Shank Size. The length column should be "Flute Length". (#5-100-16400 to -16467) |
Derek - ON Canada |
2/20/2008 |
USA/CANADA |
208 |
Catalog says SB-41 with dimensions 1/16" x 1/4" - Chart & picture
should both read SB-43 and dimensions should be 1/8" x 9/16". |
Bob H - KBC Team |
9/21/2006 |
USA/CANADA |
208 |
Text & Picture Error - Solid Carbide Burr Set should be 24 Pc. not 25 Pc. as shown in the catalog. The picture also needs to be updated to refect the 24 Pc. set . (#1-336-00) |
Paula B - KBC Team |
4/29/2007 |
USA/CANADA |
223 |
Text Error - Plain Slitting Saws #5-747-002 is a 1-3/4" diameter not a 2" as shown. |
Valerie V - KBC Team |
1/16/2007 |
USA/CANADA |
224 |
Features Error - (#5-748-001 thru 5-748-145) has the incorrect features
listed. They are switched with staggered teeth. Features for straight tooth
should be: -excellent for slotting and plunging -fully ground surfaces
-recommended for thin walled parts |
Louis Ohland - WI |
7/29/2007 |
USA/CANADA |
224 |
Features Error - (#5-749-001 thru 5-749-125) has the incorrect features
listed. They are switched with straight teeth. Features for staggered tooth
should be: -excellent for slotting -free cutting -recommended where chip
packing is a problem. |
Louis Ohland - WI |
7/29/2007 |
USA/CANADA |
268 |
Text Error - "T" Dimension says .188, but should say .125.
(#1-26015-TN004), (#1-26016-TN002, -TN004), (#1-26011-TN002, -TN003), (#1-26013-TN002,
-TN003) |
Siegel Ind. - Grosse Pointe, MI |
10/16/2007 |
USA/CANADA |
271 |
Text Error - Utility Ground SEKN Inserts - Thickness is not 3/16" it
should say 1/8". (#6-APA-42A-2 & -42A-6) |
Jackie W - KBC Team |
10/24/2006 |
USA/CANADA |
272 |
Text Error - TMX MDJN R/L Indexable Toolholders - DNMG Insert Series should be 54 not 53 series. (#6-715R-416 to -486), (#6-715R-416 to -486) |
Bob H - KBC Team |
2/20/2008 |
USA/CANADA |
275 |
Text Error - TMX MTJN R/L Toolholders, the Tool Style should say MTJNR/L 20-5D not 20-3D as shown. (#6-740L-220 and 6-740R-220) |
Pat Sr. - KBC Team |
12/14/2006 |
USA/CANADA |
279 |
Text Error - MCLN R/L Indexable Toolholders the MCLNR/L 20-5D should have an OAL of 6" no 7". (#1-285L-034 & #1-285R-034). |
Doshi - Diamant Inc., Mississauga |
2/20/2008 |
USA/CANADA |
275 |
Text Error - TMX MTJN R/L Toolholders, the Tool Style should say MTJNR/L 20-5D not 20-3D as shown. (#6-740L-220 and 6-740R-220) |
Pat Sr. - KBC Team |
12/14/2006 |
USA/CANADA |
275 |
Text Error - TMX MTJN R/L Toolholders, the Tool Style should say MTJNR/L 20-5D not 20-3D as shown. (#6-740L-220 and 6-740R-220) |
Pat Sr. - KBC Team |
12/14/2006 |
USA/CANADA |
275 |
Text Error - TMX MTJN R/L Toolholders, the Tool Style should say MTJNR/L 20-5D not 20-3D as shown. (#6-740L-220 and 6-740R-220) |
Pat Sr. - KBC Team |
12/14/2006 |
USA/CANADA |
281 |
Wrong Pictures - MTAN R/L Toolholder pictures show square inserts, but should show triangular inserts. |
Scot/Kathy - KBC Team |
5/29/2007 |
USA/CANADA |
287 |
Text Error - SI-CTFP R Indexable Boring Bars insert text error. Part No. 6-939-173 thru -175 use inserts TPU-32. Part No. 6-939-176 thru -178 use TPU-43. |
Bob H - KBC Team |
3/07/2007 |
USA/CANADA |
293 |
Text Error - Internal Turning Indexable Toolholders Type 2 - holder no.
wrong says SBN8-3 should say: SBN8-2 (#1-397-201 & #1-397-206) & SBN10-3
should say: SBN10-2 (#1-397-202 & #1-397-207). |
Bob H - KBC Team |
10/23/2006 |
USA/CANADA |
294 |
Style TT inserts do not fit borite boring bars. A new part # with a suffix
-B has been created. (#1-2542-130, -135 & #1-2545-130, -135) |
Mike - KBC Team |
10/03/2006 |
USA/CANADA |
294 |
Borite Indexable Boring Bars (#1-512-700 thru -717) will not work with the TT inserts shown. The Borite TT inserts must be used which are the same numbers with a -B at the end (Ex. 1-2545-130-B/1-2545-135-B). |
Edward F - KBC Team |
2/23/2007 |
USA/CANADA |
300 |
Missing Text - 90 Positive Rake Indexable End Mills
Repair Parts TM4 should say "Locking Screw for 1-1/2" End Mills & Part
6-901-004 3/4" x 3/4" SS One Insert End Mill." (#6-999-268) |
Greg S - KBC Team |
10/12/2006 |
USA/CANADA |
301 |
Text Error - TMX APXT Indexable End Mills #6-941-005 thru -045 use APXT 1604 Inserts not APXT 1035. |
Bhaven Doshi - Etobicoke, ON |
1/29/2007 |
USA/CANADA |
302 |
Dorian Tool Positive 90 Indexable Milling Cutters - APKT-1003-PDER Grade DASK25M should be part number 1-2864-010 not prefix 1-2866-. |
Mike - KBC Team |
2/23/2007 |
USA/CANADA |
304 |
TRI-DEX Indexable End Mill Sets the phrase "inserts sold separately; supplied in wood blocks" needed the semi-colon. |
Brent Rothwell - BC |
3/13/2007 |
USA/CANADA |
310 |
Tool Flo Indexable Ballnose End Mills - The "AP22" Grade has changed to "AT26" Grade. (#1-2947-001 thru -008). |
Greg S - KBC Team |
7/25/2007 |
USA/CANADA |
312 |
Text Error - #1-286A-115 the D1 dimension is wrong.
It should be 1-1/8, not 1-1/4 as shown. |
Mike - KBC Team |
8/23/2007 |
USA/CANADA |
312 |
Text Error - The text in the second bullet under features should read " Positive inserts, 15 degrees clearance. |
Scot - KBC Team |
7/25/2007 |
USA/CANADA |
329 |
Text Error - Column heading wrong says "Insert GF", but it should say "Insert GT". (#1-260-00275 thru -00286, #1-260-04585 thru -04598, & #1-260-04575 thru -04584). |
Greg S - KBC Team |
2/01/2007 |
USA/CANADA |
334 |
Description Error - #1-260-17012 & 1-260-17014
have the incorrect dimensions. It states 1 x1 and should be 3/4 x 3/4
on the "H" and "B" dimensions. |
Louis T - KBC Team |
8/14/2007 |
USA/CANADA |
345 |
Product CANNOT be sold in Canada. - The Zebra Skimmers
Oxygenator needs to be removed from the Canadian catalog. (#1-122-018,
-019) |
Kathy K - KBC Team |
11/17/2006 |
CANADA |
345 |
Wrong Text - The model numbers are listed incorrectly for the Zebra Belt Skimmers. The should be: (#1-122-027 is BPF1-12), (#1-122-028 is BPF1-18), (#1-122-029 is BPF1-24). |
John - KBC Team |
2/20/2008 |
USA & CANADA |
356 |
Snap-Loc System Female Hose to Male Pipe Thread Connectors are sold in packs of 2 not 4 as stated. (#1-835-8525103, -8550104, -8550105) |
Greg S - KBC Team |
12/12/2006 |
USA/CANADA |
359 |
Wrong Description in chart #1-439-31909 should say "Mini Spout Lid" & #1-439-31928 should say "1.5 Liter Drum". |
Lynne - KBC Team |
2/21/2007 |
USA/CANADA |
366 |
Spelling Error - 1st paragraph, second line, the word "powers" should say "powders." (#1-444-21030 thru -41050). |
Charlie Y - KBC Team |
5/25/2007 |
USA/CANADA |
377 |
(#1-442-014) Due to Hazmat Regulations Dykem Remover & Cleaner Gallons
can only be sold for pick-up only. The item cannot be shipped at all. |
Kathy K - KBC Team |
10/09/2007 |
USA/CANADA |
383 |
Permatex Gasket Remover can no longer be sold in California. (#1-444-80646) |
Kathy K - KBC Team |
2/20/2008 |
USA/CANADA |
387 |
Incorrect part # 1-611-50003 should be changed to # 1-611-50004. |
Valerie - KBC Team |
9/12/2006 |
USA/CANADA |
398 |
Square Tool Bits Cross-Sell - Quantity Discounts should not be listed.. |
Greg S - KBC Team |
11/08/2006 |
USA/CANADA |
401 |
Text Error - Heading should be changed from Carbide Jawed Keyless Chuck
to Jawed Keyless Chuck. * Statement should read: "*Carbide4 chuck
jaw with ratchet locking system for easy locking and releasing." |
Scott Bryceland - White Rock, BC |
10/11/2006 |
USA/CANADA |
401 |
LFA Heavy-Duty Keyless Precision Chucks have the wrong capacity for Model
61BA & Model 64A. (#1-509-005 should list 0-5/16" as the capacity.) & (#1-509-020
should list 1/32"-5/8" as the capacity.) |
Kathy K - KBC Team |
10/03/2007 |
USA/CANADA |
401 |
Model numbers are incorrect for LFA Heavy-Duty Keyless Precision Chucks.
They should be (#1-509-005 is 61BA), (#1-509-010 is 62A), (1-509-015 is
63A), (#1-509-020 is 64A). |
Kathy K - KBC Team |
10/09/2007 |
USA/CANADA |
402 |
Rohm Key-Type Drill Chucks have the wrong key types for 2 chucks. (#1-507-666579 should be a S-4 key) & (#1-507-81284 should be a S-10T key). |
Greg S - KBC Team |
7/23/2007 |
USA/CANADA |
403 |
Text Error - Straight Shank Drill Chuck Arbors
- Jacobs Taper chart says 3JT - should say 4JT (#1-507-195). |
Mike - KBC Team |
10/05/2006 |
USA/CANADA |
416 |
Part Number Error - The TMX (Bison) V-Flange Tooling
Racks (#7-200-234 should be 7-200-504) & (#7-200-235 should be 7-200-0505). |
Nick - KBC Team |
8/21/2007 |
CANADA |
419 |
Text Error - Collis BT Taper End Mill Holders -
40 BT Taper #1-543-67098 has a 1/8" bore, not a 1/2". |
Kathy K - KBC Team |
11/22/2006 |
USA/CANADA |
420 |
Text Error - Bison CAT V-Flange Shell End Mill Holders the CAT 40 V-Flange #7-081-400 has the wrong gage length listed. It should be 2-1/2". |
Kathy K - KBC Team |
2/20/2008 |
USA/CANADA |
425 |
Spelling Error - under "P" type positive drive quick-change
adapters the word "release" is spelled wrong |
Kathy K - KBC Team |
9/27/2006 |
USA/CANADA |
425 |
Techniks - Clutch & Rigid Tap Collets have switched prices. The price
in the "rigid" tap collets needs to be switched with price of
the "clutch drive" tap collets. (#7-520-1914036 thru 1914142,
#7-520-3124079 thru 3124222, #7-520-19114036 thru 19114142, #7-520-31124079
thru 31124222) |
Greg S - KBC Team |
9/29/2006 |
USA/CANADA |
431 |
Wrong description in chart on the CAT 40, 1". Says 1" x 3" -
should be 1" x 4" end mill holder. # 7-520-TPC40 Set |
CJ - KBC Team |
9/26/2006 |
USA/CANADA |
431 |
Spelling Error - Techniks 43 Pc. TP-C40 Tooling Package says "Ince" but should say "Inch" byt the 18 pc. ER32 (#7-520-TPC40). |
Kathy K - KBC Team |
7/30/2007 |
USA/CANADA |
433 |
Text Error - Sets do not include 13/32", but they do include 1/2" chucks. (#7-082-240, -245; #7-171-3103, -3130, -3140, -4140, & -4150) |
Greg S - KBC Team |
3/27/2007 |
USA/CANADA |
433 |
Text Error - Sets should read that they include 15 pieces and not 17 as shown. (#7-082-240, -245, #7-171-4140, -4150). |
Greg S - KBC Team |
3/27/2007 |
USA/CANADA |
433 |
Text Error - Sets should read that they include 11 pieces and not 13 as shown. (#7-171-3140, -3130). |
Greg S - KBC Team |
3/27/2007 |
USA/CANADA |
438 |
Missing text - R8-1" Collets should specify "light duty" (Bison-
# 7-169-009 & Lyndex- # 1-5250-100) |
Greg S - KBC Team |
9/19/2006 |
USA/CANADA |
447 |
Bison 5C Collet Horizontal/Vertical Super Spacer is has been discontinued by the manufacturer. (#7-612-004) |
Claude - Outiltech Orleans Inc., Quebec |
2/20/2008 |
USA/CANADA |
453 |
Text Error - KBC Compound Slide Table the T-Slot
Size is 9/16" not 5/8" as shown. |
Frank Downey - Canada |
9/25/2007 |
USA/CANADA |
454 |
Text Error - Adjustable Angel Plates the column heading should say T-Bolt Size not T-Slot Size. (#8-400-170 thru -174). |
Lynne- KBC Team |
1/10/2007 |
USA/CANADA |
454 |
Text Error - Adjustable Angle Plates #8-400-172 has incorrect T-Slot size listed, it should be 7/16" not 1/2". #8-400-174 has incorrect T-slot size listed it should be 5/8", not 11/16". |
Kath K - KBC Team |
7/25/2007 |
USA/CANADA |
455 |
Missing Text - Box Parallels, size column in chart
should include (W x H x D) - the dimensions in the chart are not clearly
listed. |
Garrett Brennan - Cambridge, ON |
10/05/2006 |
USA/CANADA |
458 |
Text Error - Strong-Mag Pot-Type Magnets - the features say "1/4-20 tapped hole", but it should read "10-32 tapped holes". (#1-805-374A thru -374D). |
Esa - KBC Team |
4/23/2007 |
USA/CANADA |
459 |
Product CANNOT be sold in Canada. - The Earth-Chain Demagnetizers need to be removed from the CAN Catalog because they are not CSA approved. (#7-520E-180, -200) |
Greg S - KBC Team |
12/08/2006 |
USA/CANADA |
466 |
Weight columns are reversed on the bison milling machine vise chart.
The 7-202- plain base vises are heavier than the 7-222- plain base vises. |
Bob H - KBC Team |
10/05/2006 |
USA/CANADA |
468 |
Kurt HD & HDL Vises repeatability should read .0002", not .001" |
Dave Grillo - Vendor |
9/27/2006 |
USA/CANADA |
469 |
Palmgren Traditional Drill Press Vises have the wrong jaw width. #1-549-10 & #1-549-30
should have a jaw width of 2-1/2" not 2-716" as shown. |
Kathy K - KBC Team |
9/19/2007 |
USA/CANADA |
469 |
Incorrect Weight - (#1-549-DPL30 should be 10 lbs.), (#1-549-DPL40 should
be 15 lbs.), (#1-549-DPL60 should be 34 lbs.), (#1-549-DPL80 should be
54 lbs.) |
Kathy K - KBC Team |
8/29/2007 |
USA/CANADA |
469 |
Palmgren Low-Profile Drill Press Vises have wrong dimensions. (#1-549-DPL30
the jaw opening should be 3" and height should be 2-7/16".) (#1-549-DPL40
the jaw depth should be 1-1/2", jaw opening should be4", and
height should be 2-7/8".) (#1-549-DPL60 the jaw depth should be 2",
the jaw opening should be 6", the height should be 3-9/16".)
(#1-549-DPL80 the jaw depth should be 2" and the height should be
3-9/16".) |
Kathy K - KBC Team |
9/04/2007 |
USA/CANADA |
470 |
Image Error - Plamgren Drill Press Vises show incorrect image. The vise is not ground on the end & has much less surface area than shown - it's actually tapered. |
Esa - KBC Team |
2/02/2007 |
USA/CANADA |
498 |
Dorian Tool #881 Universal Threading and Grooving Holder does not include the Threading Bar and Inserts. (D25AXA-881, D30BXA-881, D35CSA-881, D40CA-881, QITP25-881, QITP30-881, QITP35-881, QITP40-881) |
Charlie Y - KBC Team |
7/25//2007 |
USA/CANADA |
511 |
Text Error - Four-Jaw Independent Chucks - Features should say: • Bison
medium duty 4 Jaw independent chucks are designed to grip round or odd
shaped work. • Medium duty chucks have a semi-steel body and hard
solid reversible jaws. • Solid jaws are made of high quality carbon
steel and they are hardened. • Four jaw semi-steel body Lathe Chucks
with hard solid reversible jaws. - Standard accessories: • 1 set of
hard solid reversible jaws. • 1 wrench. • 1 set of clamping bolts. |
Bob H - KBC Team |
10/30/2006 |
USA/CANADA |
514 |
Spelling Error - Bison Three & Six-Jaw "SET-TRU" Scroll Chucks. The first paragraph the 5th line should be less distortion per jaw. |
Charlie Y - KBC Team |
3/27/2008 |
USA/CANADA |
516 |
Six-Jaw Self Centering Scroll Chucks the chart has the incorrect size
with the part number. The correct sizes are: (#8-688-060 is a 6"),
(#8-868-080 is a 8"), (#8-868-100 is a 10"), (#8-868-120 is a
12"), (#8-868-160 is a 16"). |
Kathy K - KBC Team |
9/05/2007 |
USA/CANADA |
526 |
Text Error - In the features it says freer grinding. It should say "free". |
Charlie Y - KBC Team |
2/20/2008 |
USA/CANADA |
529 |
Description change - sentence should say "Specially recommended for grinding heat sensitive steels like alluminum and stainless steels." |
Greg S - KBC Team |
2/20/2008 |
USA/CANADA |
534 |
CGW Bench & Pedestal Grinding Wheels (#1-595-35018) is not available in 36-M Grit. It should be in the 36-O Grit column. |
Bob F - KBC Team |
4/30/2007 |
USA/CANADA |
535 |
Triumph Tool & Cutter Grinding Wheels #1-704-366 has been discontinued by supplier. |
Kathy K - KBC Team |
2/20/2008 |
USA/CANADA |
542 |
Text Error - Electroplated Diamond Pins Type 3 - (#1-643A-1000 & 1-643B-1000) should have a head dia. Of 1.000. |
Pat Sr. - KBC Team |
2/21/2007 |
USA/CANADA |
549 |
Size Error - # 1-632-07086 Carbo Cut-off Wheel should say 14" x
3/32" x 1" |
Kathy K - KBC Team |
9/22/2006 |
USA/CANADA |
570 |
Sandblasters have a 9" x 20" size window not a 7" x 18" window
as shown in the catalog. (#2-011-3024, -3624, -2624E) |
Boris - C&S Machining, ON |
8/29/2007 |
USA/CANADA |
574 |
Text Error - Advance Brush Straight End Brushes - Knot Type have the
wrong Dia. It should be: 1" for #1-621-029 & #1-621-030. |
Michelle - KBC Team |
7/30/2007 |
USA/CANADA |
574 |
Crimped Wire Cup Brushes the (#1-621-037) has the wrong diameter and
wire size. The diameter should be 3-1/2" and the wire size should
be .014". |
Bob - KBC Team |
9/04/2007 |
USA/CANADA |
575 |
Missing Text - Knot Type Wire Wheel Brushes column for Arbor Hole Size
is missing from chart. (#1-621-045 is 1/2"-3/8", -046 is 5/8"-1/2",
-047 is 5/8"-1/2", -048 is 5/8", -049 is 5/8", -050
is 1-1/4", -051 is 1-1/4", -052 is 1/2"-3/8", -053
is 5/8"-1/2", -054 is 5/8"-1/2", -055 is 5/8",
-056 is 1-1/4", -110 is 5/8"-1/2", -111 is 5/8"-1/2",
-112 is 5/8"). |
Greg S - KBC Team |
10/05/2006 |
USA/CANADA |
577 |
Part # Error - Superior Shur-Blue Utility Cloth Rolls #1-613-44559 should
be #1-613-44959. |
C J - KBC Team |
11/10/2006 |
USA/CANADA |
586 |
Merit Power-Lck Quick-Change Abrasive Discs #1-6204-024 thru -320 are 100 per package not 50 as stated in the catalog. |
Lynne - KBC Team |
7/16/2007 |
USA/CANADA |
592 |
Superior Taper Rolls priced per standard package of 100. Should not say
list price per roll |
Kathy K - KBC Team |
9/27/2006 |
USA/CANADA |
596 |
Superior Shur-Brite Surface Conditioning Discs - Quick-Change Discs have incorrect part number. The following: (#1-613-38456 should be 1-613-38459), (#1-613-38457 should be 1-613-38460), & (#1-613-38458 should be 1-613-38461) because these are type "R". |
Mike - KBC Team |
7/05/2007 |
USA/CANADA |
602 |
Picture Wrong - Bright-Tex Abrasive Disc Mandrel is shown with a washer or flange. It is not provided by the supplier. (#1-442-515159) |
Murray - KBC Team |
2/20/2008 |
USA/CANADA |
604 |
Cratex "MX" Rubberized Abrasive Polishing Kit - Model 1800 has the wrong picture shown. (#1-614-1800) |
Murray - RNA Automated Systems |
1/26/2007 |
USA/CANADA |
607 |
Bore Sizes listed incorrectly. (1-610FH-139, -153, -167, -181 are 3-1/4" -
3-1/2"), (1-610FH-140, -154, -168, -182 are 3-1/2" -3-3/4"),
(1-610FH-141, -155, -169, -183 are 3-3/4" - 4"), (1-610FH-142,
-156, -170, -184 are 4" - 4-1/2"), & (1-610FH-143, -157,
-171, -185 are 4-1/4" - 4-1/2"). |
Cyril - Cycle City |
10/06/2006 |
USA/CANADA |
610 |
Formax Buffing Compound (#1-442-62) should be Red "Rouge" not Rough as shown. |
Nathan Neels - Chilliwack, BC |
2/19/2007 |
USA/CANADA |
615 |
Text Error - 3 Pc. Set-up & inspection kit includes a 1" Dial Indicator not a 2". (#8-135-0010, -0011) |
Kathy K - KBC Team |
2/01/2007 |
USA/CANADA |
615 |
Product CANNOT be sold in Canada. Mitutoyo Dial Indicator & Stand Set needs to be removed from the CAN catalog. (#1-808-950926). |
Greg S - KBC Team |
1/29/2007 |
CANADA |
622 |
Logo Error - Micrometer Standards - TMX Logo to be replaced with KBC
Logo. KBC brand now. |
Kathy K - KBC Team |
10/23/2006 |
USA/CANADA |
623 |
Text Error - Coolant Proof Digimatic Micrometers, No SPC Output. Under
remarks says "Friction Thimble", but it is not. Should say "Ratchet
Stop" (#1-808-29334) |
Kathy K - KBC Team |
10/26/2006 |
USA/CANADA |
623 |
Wrong Cable - (#1-808-937386) is the incorrect cable listed for the micrometers. The correct cable is (#1-808-937387). |
Esa - KBC Team |
6/18/2007 |
USA/CANADA |
628 |
Part # Error - Mitutoyo Uni-Mike part #1-808-177108 is incorrect. It
should be #1-808-117108. |
Mike - KBC Team |
11/22/2006 |
USA/CANADA |
629 |
Brown & Sharpe Interchangeable Rod Inside Micrometers the picture
shown is Model 51163 not a 25104 as stated. |
Julie - KBC Team |
10/03/2006 |
USA/CANADA |
639 |
Wrong Picture - The picture in the catalog does not match the item. (#54-100-777)
should not be show with a thumb roll. |
Ron - KBC Team |
8/10/2007 |
USA/CANADA |
641 |
Price Error - Starrett Electronic Calipers Series 799 - #1-855-67410
should be $154.00, #1-855-67412 should be $218.00, & #1-855-67621 should
be $410.00. |
Paula B - KBC Team |
10/31/2006 |
CANADA |
645 |
Picture Error - The screws should be in on the front of the tool instead
of on the back with the KBC Tool makers' Spring Dividers & Calipers. |
Marc B. - ON Canada |
3/30/2007 |
USA/CANADA |
664 |
Brand Error - (#1-819-023) Magnetic Base is a Technoplan not a Kanon
as shown in the catalog. It is still made in Japan. |
John E - KBC Team |
11/17/2006 |
USA/CANADA |
669 |
# 1-855-71460 Starrett Scriber should read 3/16" x 25/64" x
2-3/4" dimensions with Series 255. |
Bob H - KBC Team |
9/11/2006 |
USA/CANADA |
677 |
Starrett Surface Plate Cleaner pint size is no longer available. It is
being replaced by a quart. (#1-855-81825) |
Kathy K - KBC Team |
10/02//2007 |
USA/CANADA |
680 |
Text Error - 17 Pc. Angle Block Set is supplied in a plastic case not in a wood case as stated in the catalog. |
Greg S - KBC Team |
12/06//2006 |
USA/CANADA |
682 |
Missing Text - Fisher Toolmaker's V-Blocks should also list: Tolerances: Accurate to .0002 inch and match ground to .0002 inch. |
John - Fisher Machine |
12/21/2006 |
USA/CANADA |
684 |
90 degree Precision V-Block (#1-814-112) the height should be 5". |
Ralph H - KBC Team |
5/29/2007 |
USA/CANADA |
684 |
Picture Error - Precision V-Blocks do not have a center screw. The image needs to be updated. (#1-814-110 thru -114) |
Tim W - KBC Team |
3/05/2007 |
USA/CANADA |
691 |
Logo Error - SPI Logo is cropped wrong. |
Kathy K - KBC Team |
10/05/2006 |
USA |
693 |
Text Error - Fowler Electronic Edge Finders (#54-575-600) uses 12 volt & 23A
batteries, not AAA as shown. |
Ron N - KBC Team |
10/20/2006 |
USA |
693 |
Missing Text - TMX 6" Electronic Edge Finder should also include the Stylus Length of 1.77" in the specifications. |
Sabina K - KBC Team |
6/05/2007 |
USA/CANADA |
696 |
Text Error - Mitutoyo Dial Bore Gages - The range for (#1-808-526122 & #1-808-526119) shows the incorrect range. It should be .3"-.4". |
Keith Webster - Qualified Metal Fab Ltd., Toronto |
3/27/2008 |
USA/CANADA |
698 |
Text Error - Meyer Gage Gage Pins & Sets (#1-8091-024 & #1-8092-024)
have the wrong pin gage range listed. It should be .015 thru .6255. |
Bob H - KBC Team |
7/26/2007 |
USA/CANADA |
699 |
Text Error - Starrett Internal Gages the range for numbers (#1-855-63687 & 1-855-63691) should be 1-2". |
Nicole G - KBC Team |
6/15/2007 |
USA/CANADA |
700 |
Wrong Text - Thickness Gages the Inch chart has the wrong column heading. The second column should read Thickness Range. (#1-820-301, -302, -303) |
Murray - KBC Team |
2/20/2008 |
USA/CANADA |
711 |
Spelling Error - Brown & Sharpe Precision Squares the second chart
has the spelling error in the heading. It should be "squares". |
Murray |
8/03/2007 |
USA & CANADA |
712 |
Text Error - Starrett heads are for 12" to 24" blades, not
only 18" as listed. (#1-855-50071, -50225, -50074, -50228) |
Tom L - KBC Team |
11/08/2006 |
USA & CANADA |
715 |
Picture Error - Mitutoyo Digtial Protractor Model Pro360 is the wrong picture. It should only have 1 decimal place. (#1-808-950315). |
Johnny Kaiser - Alpha Performance |
2/28/2007 |
USA & CANADA |
722 |
General Adjustable Illuminated Magnifier - Picture and Description are wrong. It should state that it has a round lens and 4" diameter. (#1-805-1050) |
Kathy K - KBC Team |
2/02/2007 |
USA & CANADA |
735 |
Wilton 41 & 43 Series C-Clamps headings switched on chart. Series
41-Regular Duty Deep Throat should be the first heading. Series 43-Heavy
Duty, Deep Throat should be second. |
Lee T. - KBC Team |
9/29/2006 |
USA/CANADA |
742 |
Steel Bar Clamps Misleading - Picture is of Pony (1-820-495/500) only, not for the KBC branch which is also listed. There is no label by the picture to say which model. |
Erwin - Torkin Custom Machine |
1/20/2007 |
USA/CANADA |
744 |
Text Error - The overall length is incorrect for #1-990-101A. It should be 1-31/32" not 31/32". |
Greg S - KBC Team |
1/20/2007 |
USA/CANADA |
745 |
Picture Error - Destaco Air/Hydraulic Powered Plunger Toggle Clamps picture is switched with the Air/Hydraulic Powered Hold-Down Toggle Clamps. (#1-910-58030, -58160, -58300, -58500, -58020, -58071, -58070, -58101, -58100, -58120, -58170, -58271, -58460, -58471, -58470, -58580, -58680) |
Greg S - KBC Team |
7/25/2007 |
USA/CANADA |
747 |
Image Error - Destaco Neoprene Caps for Hex Head Spindles have the wrong
picture in the catalog. (#1-910-59102, -59103, -59105). |
Tanya M. - KBC Team |
11/07/2006 |
USA/CANADA |
761 |
Dimension Error - Morton Aluminum Hand Knobs the #1-905-HK616A has the
incorrect "A" dimension. It should be 2-1/2". |
Lynne - KBC Team |
9/18/2007 |
USA/CANADA |
763 |
Wrong thread size. (#1-905-AH305 & #1-905-MH305 should be 3/8"-16),
(#1-905-AH306 & #1-905-MH306 should be 3/8"-16), (#1-905-AH307 & #1-905-MH307
should be 3/8"-16), (#1-905-AH308 & #1-905-MH308 should be 1/2"-13), & (#1-905-AH309 & #1-905-MH309
should be 1/2"-13). |
Lynne - KBC Team |
9/29/2006 |
USA/CANADA |
763 |
All Morton AH & MH clamping levers & handles are made in Germany
- NOT USA (USA flags to be removed from artwork.) |
Lynne - KBC Team |
10/10/2006 |
USA/CANADA |
769 |
Holo-Krome Cup Point Socket Set Screws - (#1-908-355) is listed as 7/16-14 x 1-3/4" but should be 7/16-14 x 2". (#1-908-356) is duplicated in catalog. The 7/16-14 x 2" is wrong and should only be 1/2-13 x 3/8". (#1-908-357) is duplicated in the catalog. The 7/16-14 x 2-1/2" is wrong and should only be 1/2-13 x 1/2". |
Kathy K - KBC Team |
6/05/2007 |
USA/CANADA |
774 |
Text Error - Socket Shoulder Screws (KBC & Holo-Krome) shows wrong
thread of #10-20 on the chart of 1/4". Should say #10-24. (Part #1-9491-024
to -132 & #1-908-387 to -393). |
Ronald Myers - Kenmore, NY |
10/05/2006 |
USA/CANADA |
778 |
Text Error - Long Life Die Springs - Rod Dia. Wrong for 1" Hole Dia. It should be 1/2" not 1-1/2" as listed. (#H-100-100 thru -800, #M-100-100 thru -800, #MH-100-100 thru -800) |
Joe - OSI Industrial |
11/26/2006 |
USA/CANADA |
784 |
Starrett A2 Hir Hardening 36" long - (#1-8552-56515) is the 7/8x1-1/2x36". By error the same part # was used for 1x1-1/2x36", but it should be (#1-8552-56516) for the 1x1-1/2x36. |
Joann - Lunar Industries. |
6/20/2007 |
USA/CANADA |
786 |
Size Error - Drill Rod - Oil Hardening the decimal equiv. is wrong for
20MM. It should be .7874. (#1-950M-020) |
Jade Tool - Xenia, OH |
9/24/2007 |
USA/CANADA |
788 |
Precison Brand Packaged Shim Stock steel shim 3rd chart the heading should read "150mm x 2.5 Meter" not "150mm x 120 meter." |
Tom L - KBC Team |
7/13/2007 |
USA/CANADA |
798 |
Description Change - Bondhus Balldriver T-Wrench Sets w/ Pouch - BTX
70MM is now changed to BTX 80MM with a new range of 2.0-10mm. |
Cathy D - KBC Team |
10/30/2006 |
USA/CANADA |
801 |
Wilton discontinued invidvidual hex socket bits. (#1-550-36526 to #1-550-26541) |
Greg S - KBC Team |
9/27/2006 |
USA/CANADA |
803 |
Wilton discontinued individual torx socket bits. (#1-550-36542 to #1-550-36551) |
Greg S - KBC Team |
9/27/2006 |
USA/CANADA |
816 |
Text Error - Wrong sizes 8, 10, 12, 13, 14 & 15mm. Should say: 10,
12, 13, 15, 17, & 19mm. (Part #1-909-1976) |
Tim W - KBC Team |
10/04/2006 |
USA/CANADA |
816 |
Text out of order - Allen Combination Wrenches the 5 pc. Metric Set should read 8, 10, 11, 12 & 13mm. (#1-906-29023) |
John Moyer - Detroit, MI |
10/04/2006 |
USA/CANADA |
839 |
# 1-855-51285 should state that it comes in a plastic case, not wood |
Kathy K - KBC Team |
9/01/2006 |
USA/CANADA |
841 |
# 1-855-52586 should state that it comes in a plastic case, not wood. |
Kathy K - KBC Team |
9/01/2006 |
USA/CANADA |
841 |
Wrong Picture - Wilton Pin Punches have the wrong picture show. It should be straight not tapered. (#1-550H-34501 to -34509) |
Adam Borowski - Milton, ON |
2/20/2008 |
USA/CANADA |
841 |
Wrong Picture - Wilton Extra Long Pin Punches have the wrong picture shown. It should be straight not tapered. (#1-550H-34701 to -34705) |
Adam Borowski - Milton, ON |
2/20/2008 |
USA/CANADA |
849 |
Text Error - Vaughan Copper Hammers - Total length for #1-925-58016 should be 14" and not 16". Total length for #1-925-58018 should be 30" and not 20". |
Lynne - KBC Team |
11/17/2006 |
USA/CANADA |
853 |
Text Error - Dewalt Heavy-Duty 3/8" VSR Drill Kit with Keyless Chuck - Features should be 6 Amp motor not 7 Amp. Specifications should be 6.0 Amps not 7.0. (#1-826-D21008K) |
Greg S - KBC Team |
11/21/2006 |
USA/CANADA |
859 |
Pictures Wrong - The images are swapped for (#1-930-10442) & (#1-930-10219). |
Greg S - KBC Team |
2/20/2008 |
USA/CANADA |
868 |
Waldmann Halogen Machine Light is not 23" flexible arm instead of 16". (#1-541W-005) |
Lynne - KBC Team |
3/02/2007 |
USA/CANADA |
881 |
AO Safety Latex Paint and Chemical Odor Respirator says that there are
2 per package. It only comes with 1. (#1-700-95071) |
Nick - KBC Team |
8/20/2007 |
USA/CANADA |
902 |
Part No. Error - Coilhose Quick-Change Couplers & Connectors Coilflow Lincoln Interchange Series #1-816-170 should be a Female pipe thread & #1-816-172 should be a Male pipe thread. |
Tim T - KBC Team |
2/20/2008 |
USA/CANADA |
912 |
Text Error - Mannix Digital Single Probe Thermometer should not have
the text "Probe length 5" with 3 ft. cord." It needs to
be removed. (#8-304-015) |
Greg S - KBC Team |
11/08/2006 |
USA/CANADA |
923 |
Part # 1-850-Z9005 length should be 23-1/4" |
Bob H - KBC Team |
9/06/2006 |
USA/CANADA |
939 |
High Density Poly Strapping System - MIP-400-12 is the Sealer not the
Poly Tensioner as shown (#3-004-40012). MIP-380 is the Poly Tensioner not
the Sealer as shown (#3-004-380). |
Bob H - KBC Team |
9/28/2006 |
USA/CANADA |
949 |
Spelling Error - Kennedy All Purpose Box has a spelling error. It should read Finish. (#1-823-05220) |
Philip Wang - Toronto, ON |
2/20/2008 |
USA/CANADA |
956 |
Spec. change - Kennedy 46" Model 46004 is now 11-drawer and picture needs to be updated to reflect the change. (#1-823-46004) |
Lynne - KBC Team |
3/09/2007 |
USA/CANADA |
964 |
Text Error - Dewalt Heavy-Duty 3/8" VSR Drill Kit with Keyless Chuck - Features should be 6 Amp motor not 7 Amp. Specifications should be 6.0 Amps not 7.0. (#1-826-D21008K) |
Greg S - KBC Team |
11/21/2006 |
USA/CANADA |
975 |
Text Error - Model number and description are incorrect for (#1-827-015). It should be 4-1/2" Electric Disc Grinder and model number 4602. |
Gasper - KBC Team |
6/05/2007 |
USA/CANADA |
976 |
Missing Text - Heavy Duty Electromagnetic Drill Stand - Add Weight of 48 lbs. to features. (#1-827-010) |
Kathy K - KBC Team |
11/28/2006 |
USA/CANADA |
980 |
Vendor change - Dremel Rotary Tool Kit now comes with only 40 accessories.
The change was made by dremel from 60 pieces. |
Kathy K - KBC Team |
9/25/2007 |
USA/CANADA |
982 |
Updated product info - Dremel (#1-829-697) is now a #697-006 150 Pc. Accessory Kit with a new picture and specs. |
Tanya M - KBC Team |
7/11/2007 |
USA/CANADA |
983 |
Text Error - Dremel Bristle Brushes have the wrong numbers under the pictures. They should be 403, 404, & 405. (#1-829-403, -404, -405) |
Bob H - KBC Team |
11/13/2006 |
USA/CANADA |
987 |
Specs Error - Circular Saw Blade (#1-826-73715) the Dia. should be 5-3/8" and the Arbor Dia. 10mm. |
Greg S - KBC Team |
2/26/2007 |
USA/CANADA |
991 |
Wrong Picture - The 3/8" Reversible Drill has the wrong picture shown. It should show a forward/reverse switch on the reversible drill. (#1-829-5547). |
Admiral Drill |
5/24/2007 |
USA/CANADA |
995 |
Text Error - Viking Pistol Grip Die Grinders #8-333-50250 Size is Collet 1/4" and #8-333-50250J is Chuck 1/4". |
Greg S - KBC Team |
1/29/2007 |
USA |
995 |
Text Error - Viking Heavy-Duty Pistol Grip Die Grinders #8-333-75180 Size is Collet 1/4" and #8-333-75180J is Chuck 1/4". |
Greg S - KBC Team |
1/29/2007 |
USA |
999 |
Wrong Heading on Features - says that it is a model "RDX12", but should say "AD12HDR". ((#3-001C-404424) |
Scot - KBC Team |
7/25/2007 |
CANADA |
1001 |
Specs Error - Florida Pneumatic has the wrong specs listed in the catalog. (#1-829-FP730). They should be Speed: 200, Bolt Capacity: 1/2", Square Drive: 3/8", Weight: 2.5 lbs., Length: 10", Air Inlet: 1/4", Rec. Air Measure: 90, Air Consumption: 4 |
Nathan Neels - Chilliwack, BC |
2/20/2008 |
USA & CANADA |
1016 |
Spindle Mount is no longer 1-1/2—8. The supplier now supplying machines with M39—4 spindle mount. (#6-335-000) |
Dean - KBC Team |
7/05/2007 |
USA/CANADA |
1021 |
Kent Heavy Duty Large Bore Engine Lathes have a 2 way rapid Traverse not a 4 way. (#6-273-051 thru -053). |
Phil T - KBC Team |
2/21/2007 |
USA |
1022 |
Missing Text - JET 13-1/2" Drill Press missing Net Weight of 115
lbs. (#3-001C-20275) |
Bob H - KBC Team |
10/11/2006 |
USA |
1023 |
Text Missing - JET 17" Drill Press missing Net Weight of 200 lbs.
(#3-001C-200278) & JET 22" Drill Press missing Net Weight of 380
lbs. (#3-001C-200357). |
Bob H - KBC Team |
10/11/2006 |
USA |
1025 |
Missing Text - Add Quill Diameter of 3-3/8" under specifications.
(#6-380-002) |
Paula B - KBC Team |
11/08/2006 |
CANADA |
1026 |
Missing Text - Add Quill Diameter of 3-3/8" under specifications. (#6-380-002) |
Paula B - KBC Team |
11/08/2006 |
USA |
1031 |
Spec. change - Kent USA High Precision Compact Machining Center. The Saddle Travel (Y-Axis) is now 13.8". (#6-273-009L) |
Phil T - KBC Team |
2/01/2007 |
USA |
|
Spec. change - Kent USA High Precision Compact Machining Center. The Saddle Travel (Y-Axis) is now 13.8". (#6-273-009L) |
Phil T - KBC Team |
2/01/2007 |
USA |
|
Jet - Listed incorrectly as Horizontal/Vertical - it is a Horizontal Only. (#3-001C-222335) |
Dean - KBC Team |
5/18/2007 |
CANADA |
|
Vertical Bandsaw Model BAV-500WF the Blade Length is 159-1/2" for both the specs and chart accessory welded band. (#6-396-015, 6-396-015B) |
Phil T - KBC Team |
2/05/2007 |
USA/CANADA |
|
Vertical Bandsaw Model BAV-360 the blade length is 119-1/2" for both the specs and chart accessory welded band. (#6-395-025, 6-395-025B) |
Phil T - KBC Team |
2/05/2007 |
USA/CANADA |
|
Vertical Bandsaw Model BAV-450 the blade length is 140-1/2" for both the specs and chart accessory welded band. (#6-395-027, 6-395-027B) |
Phil T - KBC Team |
2/05/2007 |
USA/CANADA |
|
Vertical Bandsaw Model BAV-500PF the blade length is 159-1/2" for both the specs and the welded band. (#6-396-025, 6-396-025B) |
Phil T - KBC Team |
2/05/2007 |
USA/CANADA |
|
Vertical Bandsaw Model BAV-700PF the blade length is 161" for the specs. (#6-396-035) |
Phil T - KBC Team |
2/05/2007 |
USA/CANADA |
|
Vertical Bandsaw Model NFS-450 the blade length is 145" for both the specs and the welded band. (#6-398-025, 6-398-025B) |
Phil T - KBC Team |
2/05/2007 |
USA/CANADA |
|
Disc and Belt Sander Model 9648 has the incorrect shipping weight. The correct weight is 140 lbs. (#6-150-005) |
Adam L - KBC Team |
2/05/2007 |
USA/CANADA |
1047 |
Spelling Error - #6-397-WS1685 under specifications should read: Standard
Bag Filtration ("Bag" not Bad) |
Frank K - KBC Team |
9/05/2006 |
USA |
1052 |
Index Error - Listed under "Air", Compressors are on pg. 906
not pg. 805, & Compressor Accessories are on pg. 895 no pg. 906 |
Johnny - Immanuel Gateway Machine |
9/2/2006 |
USA/CANADA |
1057 |
Index Error - Drill Indexes should only reference pg. 5. Pages 101, 103,
109, & 134 should be removed. |
Susan - Admiral Mill |
10/06/2006 |
USA/CANADA |
1057 |
Index Error - Add Tap Indexes under Drill with pgs. 101, 103, 109, & 134. |
Susan - Admiral Mill |
10/06/2006 |
CANADA |
1058 |
Index Error - Add Tap Indexes under Drill with pgs. 101, 103, 109, & 134. |
Susan - Admiral Mill |
10/06/2006 |
USA |
1059 |
Index Addition: Files needs to add a listing of Rotary on pg 208-213 to the pg 541-542 listing. |
Nick / Bob - KBC Team |
1/03/2007 |
USA/CANADA |
1061 |
Index Error - Indexes Drill should only reference pg. 5. Pages 101 & 103
should be removed. |
Susan - Admiral Mill |
10/06/2006 |
USA/CANADA |
1061 |
Index Error - Indexes Tap & Drill missing page 109. Should read 101,
103, 109, 134. |
Susan - Admiral Mill |
10/06/2006 |
CANADA |
1062 |
Index Error - Indexes Tap & Drill missing page 109. Should read 101,
103, 109, 134. |
Susan - Admiral Mill |
10/06/2006 |
USA |
1063 |
Index Error - Lock Pins are listed under Loctite. Should be it's own
categories in all caps after LockJaws. |
Paula B - KBC Team |
10/20/2006 |
USA/CANADA |
1066 |
Index Addition: Precision Brank needs to add a listing of Shim Stock on pg 788-789 and Tru-punch on pg 790. |
Greg S - KBC Team |
1/29/2007 |
CANADA |
1067 |
Index Addition: Rotary needs to add a listing of Files on pg 208-213. |
Nick / Bob - KBC Team |
1/3/2007 |
CANADA |
1069 |
Index Error - Surface Plates - Stands & Cleaner say pg. 725 - it
should say pg. 676 & 677. |
Steve C - KBC Team |
10/23/2006 |
CANADA |
1069 |
Index Error - Surface - Roughness Gage says 855. It should say 725. |
Murray - KBC Team |
12/12/2006 |
USA |
1070 |
Index Error - Surface - Roughness Gage says 855. It should say 725. |
Murray - KBC Team |
12/12/2006 |
USA |
1070 |
Index Error - Surface Plates - Stands & Cleaner say pg. 725 - it
should say pg. 676 & 677. |
Steve C - KBC Team |
10/23/2006 |
USA |
1070 |
Index Error - Tap Drill Index should say Tap & Drill Index with pgs.
101, 103, 109, 134. |
Susan - Admiral Mill |
10/06/2006 |
USA/CANADA |
II |
Text Error - 1st paragraph of the letter from the president there is
a typo for the word our - it is shown as out. It should read "At KBC
we treat our customers as part of our family." |
Scott C - KBC Team |
10/25/2006 |
USA/CANADA |
III |
Look at Me contest email address is shown in upper and lower case. It
should be paula@kbctools.com all in lowercase. |
Sabina - KBC Team |
10/16/2006 |
CANADA |
IV |
Map of Canada - red highlight should extend to province of Alberta. |
Tyler F - KBC Team |
9/14/2006 |
CANADA |
V |
Map of Canada - red highlight should extend to province of Alberta. |
Tyler F - KBC Team |
9/14/2006 |
CANADA |